Skip to main content
Version: 2.10

Raspberry Pi Deployment

Deploy FiestaBoard on a Raspberry Pi for a dedicated, always-on dashboard controller.

Compatible Models​

ModelArchitectureStatus
Raspberry Pi 3B+linux/arm64Supported (requires 64-bit OS)
Raspberry Pi Zero 2 Wlinux/arm64Supported (requires 64-bit OS)
Raspberry Pi 4linux/arm64Supported
Raspberry Pi 5linux/arm64Supported

Prerequisites​

  • Raspberry Pi with Raspberry Pi OS (Bookworm or later)
  • At least 2GB of RAM recommended
  • Docker and Docker Compose installed
  • Network access to your board

Installing Docker on Raspberry Pi​

# Install Docker
curl -fsSL https://get.docker.com -o get-docker.sh
sudo sh get-docker.sh

# Add your user to the docker group
sudo usermod -aG docker $USER

# Log out and back in, then verify
docker --version

Setting Up FiestaBoard​

# Clone the repository
git clone https://github.com/Fiestaboard/FiestaBoard.git
cd FiestaBoard

# Create your configuration
cp env.example .env
# Edit .env with your API keys

# Start FiestaBoard
docker-compose up -d --build
Build Times

The first build on a Raspberry Pi will take longer than on a desktop computer. Expect 10-20 minutes depending on your Pi model and SD card speed.

Using Pre-Built ARM Images​

For faster setup, use the pre-built images from Docker Hub:

docker-compose -f docker-compose.hub.yml up -d

This skips the build step entirely and pulls ready-to-run ARM images.

Multi-Architecture Builds​

Every release automatically builds images for both linux/amd64 and linux/arm64, so Raspberry Pi is always supported out of the box.

Note: 32-bit ARM (linux/arm/v7) is no longer supported because Node.js dropped ARM32v7 support in v20+. Please use a 64-bit Raspberry Pi OS.

Performance Tips​

  • Use a fast SD card - Class 10 or higher, ideally A2-rated
  • Consider USB boot - Boot from USB SSD for better performance
  • Monitor temperature - Use a heatsink or fan case for sustained operation
  • Set appropriate refresh intervals - Don't refresh more frequently than needed
# In .env, 60 seconds is usually sufficient
REFRESH_INTERVAL_SECONDS=60

Auto-Start on Boot​

To have FiestaBoard start automatically when your Pi boots:

# Enable Docker to start on boot
sudo systemctl enable docker

# Create a systemd service for FiestaBoard
sudo tee /etc/systemd/system/fiestaboard.service << 'EOF'
[Unit]
Description=FiestaBoard
After=docker.service
Requires=docker.service

[Service]
Type=oneshot
RemainAfterExit=yes
WorkingDirectory=/home/pi/FiestaBoard
ExecStart=/usr/bin/docker compose up -d
ExecStop=/usr/bin/docker compose down

[Install]
WantedBy=multi-user.target
EOF

# Enable the service
sudo systemctl enable fiestaboard

Accessing From Other Devices​

Once FiestaBoard is running on your Pi, you can access it from any device on the same network:

  • http://fiestaboard.local:4420 — works on most home networks via mDNS/Bonjour. No need to remember the Pi's IP address.
  • http://<pi-ip-address>:4420 — use this if .local addresses don't work on your network. Find your Pi's IP with hostname -I.

To change the advertised hostname, set MDNS_HOSTNAME in your .env file (default: fiestaboard, which becomes fiestaboard.local).

Next Steps​